|
|
|
FMVSS No. 108
|
|
Paragraph S7.5(b)
specifies that any replaceable bulb headlamp system shall be designed to
conform to the appropriate photometric requirements of the standard using
any light source of the Type intended for use in such system.
Paragraph S7.7
specifies that each replaceable light source shall be designed to conform
to the design specifications furnished with respect to it pursuant to
part 564. The table below is a tabulated summation of the entries
for replaceable light sources filed in Docket No. NHTSA 98-3397, pursuant
to Part 564, for use in motor vehicles (except motorcycles), plus some of
their major design characteristics.
|
|
|
Please Note:
|
|
1. No other bulb type is allowed for use in an
original equipment application if it is not filed in Docket No. NHTSA
98-3397.
|
|
2. Each light source has a maximum allowable
wattage.
|
|
3. Each light source specifies the allowable
coatings.
|
|
